System information

3-34 Adit 3000 CLI - Release 1.6
Privileged Mode
show
show config voice-port fxs
Use the show config voice-port fxs command display the FXS port information.
Syntax: # show config voice-port fxs [port]
Example: # show config voice-port fxs 1
voice-port fxs
no digit-map
dial-timeout 5
voice-port fxs 1
description Line 1
no comfort-noise
echo-cancel enable
input-gain 0
output-gain 0
signal loop-start
no per-line-logging
no shutdown
Supported Platforms:
Adit 3104, Adit 3500
Field Definition
port FXS port to display. Range 1 - 24