System information

Adit 3000 CLI - Release 1.6 3-29
Privileged Mode
show
show config interface serial
Use the show config interface serial command to display the Serial port information.
Syntax: # show config interface serial port
Example: # show config interface serial 1
interface serial 1
encapsulation ppp
no ppp authentication
no ppp encryption
no ppp username
ppp restart-timer 3
ppp time-btwn-reconnect 30
no ppp on-demand
ip address unnumbered
description Serial 1
ip mtu auto
no ip primary-dns
no ip secondary-dns
ip route-mode napt
ip default-route enable
no ip rip
ip rip receive-version none
ip rip send-version none
no sip-alg
firewall enable
metric 0
no shutdown
no schedule-availability
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
port Serial port to display.
Adit 3104 Range = 1
Adit 3500 Range 1 - 4