System information

3-24 Adit 3000 CLI - Release 1.6
Privileged Mode
show
show config access-control
Use the show config access-control command to display all access control filters.
Syntax: # show config access-control
Example: # show config access-control
access-control id 1 apply-to lan time-range always service 1 enable
Supported Platforms: Adit 3104, Adit 3200, Adit 3500
show config access-list
Use the show config access-list command to display all access lists.
Syntax: # show config access-list
Example: # show config access-list
access-list rule 0 apply eth-lan direction in operation accept time-range 0
src-host 0.0.0.0-255.255.255.255 dst-host 0.0.0.0-255.255.255.255 service
50331673 frag none log none (enable)
Supported Platforms: Adit 3104, Adit 3200, Adit 3500