System information

Adit 3000 CLI - Release 1.6 24-11
Configuration - Voice Service SIP Mode
outbound-proxy
outbound-proxy
Use the Voice Service SIP outbound-proxy command to configure the SIP outbound proxy. To disable
outbound proxy, see no outbound-proxy command on page 24-9.
Syntax: (config-voice-serv-sip)# outbound-proxy {hostname hostname|
ip-address address}
Example: (config-voice-serv-sip)# outbound-proxy ip-address
192.168.1.140
Supported Platforms:
Adit 3104, Adit 3500
phone-number
Use the Voice Service SIP prack command to configure the phone number maximum size.
Syntax: (config-voice-serv-sip)# phone-number max-size number
Example: (config-voice-serv-sip)# phone-number max-size 11
Supported Platforms:
Adit 3104, Adit 3500
prack
Use the Voice Service SIP prack command to enable Provisional Acknowledgement (PRACK), as per
RFC 3262. To disable PRACK, see no prack command on page 24-9.
Syntax: (config-voice-serv-sip)# prack enable
Example: (config-voice-serv-sip)# prack enable
Supported Platforms:
Adit 3104, Adit 3500
Field Definition
hostname Enter the host name of the outbound proxy.
address Enter the IP address of the outbound proxy.
Field Definition
number Enter the maximum size for the phone number. Range 3 - 24.