Manualshelf

System information

ManualsBrandsCarrier Access ManualsNetwork CardAdit 3200
441442443444445446447448449450
Adit 3000 CLI - Release 1.6 24-7
Configuration - Voice Service SIP Mode
feature-mode
feature-mode
Use the Voice Service SIP feature-mode command to determine where the intelligence for the calling
features will lie, offering a choice between server-based (Info) and device-based (local) features.
Syntax: (config-voice-serv-sip)# feature-mode {info|local}
Example: (config-voice-serv-sip)# feature-mode info
Supported Platforms:
Adit 3104, Adit 3500
gateway-ip
Use the Voice Service SIP gateway-ip command to set the IP address to be used as the source IP for
VoIP.
Syntax: (config-voice-serv-sip)# gateway-ip address
Example: (config-voice-serv-sip)# gateway-ip 10.10.2.1
Supported Platforms:
Adit 3104, Adit 3500
Field Definition
info This selection is used with BroadSoft 11.1 Info Mode Proxy. Note: On
a BroadSoft server, the Adit device must be configured as “Generic
SIP Standard (Proxy Address)”.
local Default is Local.
Field Definition
address The IP address to be used as the source IP for VoIP services when it
matches one of our up or running interfaces’ IP addresses, otherwise
our VoIP source IP address is determined by the previous automatic
algorithm.