System information

23-10 Adit 3000 CLI - Release 1.6
Configuration - Voice Port Trunk Mode
output-gain
no registration line enable
Use the Voice Port Trunk no registration line enable command disable a registration line. To
enable line registration, see registration line enable command on page 23-12.
Syntax: (config-vport-trk-{n})# no registration line number enable
Example: (config-vport-trk-1)# no registration line 1 enable
Supported Platforms:
Adit 3500
no registration line logging
Use the Voice Port Trunk no registration line logging command disable line logging on a PBX
line. To enable logging, see registration line logging command on page 23-13.
Syntax: (config-vport-trk-{n})# no registration line number logging
Example: (config-vport-trk-1)# no registration line 1 logging
Supported Platforms:
Adit 3500
output-gain
Use the Voice Port Trunk output-gain command to set the gain on the transmit side voice path for the
specified voice channel(s).
Syntax: (config-vport-trk-{n})# output-gain value
Example: (config-vport-trk-1)# output-gain 6
Supported Platforms:
Adit 3500
Field Definition
number Enter line number to disable. Range 1 -300. Note: This line must be
enabled for this command to be accepted.
Field Definition
number Enter line number to disable. Range 1 -300.
Field Definition
value Range -12 to +6dB. Default is 0.