System information

Adit 3000 CLI - Release 1.6 2-19
User Mode
show
show running-config
Use the show running-config command to display the current configuration of the system.
Syntax: Adit 3500> show running-config
Example: Adit 3500> show running-config
ip host adit3500
log system notify none
log security notify none
log t1 notify none
.
.
clock source 1 t1 1
clock source 2 none
nat-bypass ip-address 192.168.1.120 mask 255.255.255.0
nat-bypass ip-address 192.168.1.120 mask 255.255.255.0 enable
controller t1 1
description T1 #1
lbo short 133
fdl none
framing esf
linecode b8zs
loopdetect none
loopback none
idle-pattern 0x7f
no tdm-group
ds0-group timeslots 1-12
threshold daily ses 0
.
.
no shutdown
exit
controller t1 2
description T1 #2
.
.
interface ethernet 1
ip address 192.168.1.150 mask 255.255.255.0
description LAN Hardware Ethernet Switch
ip mtu auto
no tos ip
tos ip value 0x0
no ip dhcp auto-provision
no ip primary-dns
no ip secondary-dns
ip route-mode route
no ip default-route
no ip proxy-arp
no ip rip
ip rip receive-version 1or2
ip rip send-version 2-bcast
no sip-alg
no firewall
metric 50
no shutdown
speed auto
full-duplex
remote-admin enable