System information

Adit 3000 CLI - Release 1.6 23-9
Configuration - Voice Port Trunk Mode
no commands
no echo-cancel
Use the Voice Port Trunk no echo-cancel command disable echo cancellation on this port. To
enable echo cancellation, see echo-cancel command on page 23-5.
Syntax: (config-vport-trk-{n})# no echo-cancel
Example: (config-vport-trk-1)# no echo-cancel
Supported Platforms:
Adit 3500
no registration enable
Use the Voice Port Trunk no registration enable command disable trunk registration. To enable
registration, see registration enable command on page 23-11.
Syntax: (config-vport-trk-{n})# no registration enable
Example: (config-vport-trk-1)# no registration enable
Supported Platforms:
Adit 3500
no registration line
Use the Voice Port Trunk no registration line command remove a registration line. To add a
registration line, see registration line enable command on page 23-12.
Syntax: (config-vport-trk-{n})# no registration line number
Example: (config-vport-trk-1)# no registration line 1
Supported Platforms:
Adit 3500
Field Definition
number Enter line number to Remove. Range 1 -300. Note: This line must be
enabled for this command to be accepted.