System information

23-2 Adit 3000 CLI - Release 1.6
Configuration - Voice Port Trunk Mode
comfort-noise
comfort-noise
Use the Voice Port Trunk comfort-noise command to enable the comfort noise feature. To disable this
feature, see no comfort-noise command on page 23-8.
Syntax: (config-vport-trk-{n})# comfort-noise enable
Example: (config-vport-trk-1)# comfort-noise enable
Supported Platforms:
Adit 3500
connection t1
Use the Voice Port Trunk connection t1 command to enter the T1 connection configuration mode. To
disconnect this connection, see no connection t1 command on page 23-8.
Syntax: (config-vport-trk-{n})# connection t1 port
Example: (config-vport-trk-1)# connection t1 2
Supported Platforms:
Adit 3500
description
Use the Voice Port Trunk description command to set the circuit ID of the voice port.
Syntax: (config-vport-trk-{n})# description text
Example: (config-vport-trk-1)# description VoiceP-#4
Supported Platforms:
Adit 3500
Field Definition
port T1 port range 1-4.
Field Definition
text Enter a description for the Controller T1, with a maximum of 64
characters.