System information
CHAPTER
23
Configuration - Voice Port Trunk Mode
The Voice Port Trunk Configuration commands allow the user to configure the Voice Port Trunk
parameters.
Enter this sub-group with the (config)# voice-port trunk number command from the Configure mode.
Note: The Trunk option is not supported on the Adit 3104 or the Adit 3200.
The Voice Port Trunk commands are represented by the (config-vport-trk-{n})# prompt.
Voice Port Trunk Commands
comfort-noise
connection t1
description
digit-map
do
echo-cancel
end
exit
history
input-gain
isdn switch-type (PRI)
no commands
output-gain
registration
signal
trunk