System information

22-2 Adit 3000 CLI - Release 1.6
Configuration - Voice Port FXS Mode
comfort-noise
comfort-noise
Use the Voice Port FXS comfort-noise command to enable the comfort noise feature. To to disable
comfort noise, see no comfort-noise command on page 22-6.
Syntax: (config-vport-fxs-{n})# comfort-noise enable
Example: (config-vport-fxs-1)# comfort-noise enable
Supported Platforms:
Adit 3104, Adit 3500
description
Use the Voice Port FXS description command to set the circuit ID of the voice port.
Syntax: (config-vport-fxs-{n})# description text
Example: (config-vport-fxs-1)# description VoiceP-#2
Supported Platforms:
Adit 3104, Adit 3500
Field Definition
text Enter a description for the Controller T1, with a maximum of 64
characters.