System information

20-4 Adit 3000 CLI - Release 1.6
Configuration - VLAN Port Mode
no commands
no commands
no port
Use the VLAN no port command to remove this port’s membership from the VLAN. To set the
preferences, see port command on page 20-5.
Syntax: (config-vlan-{n})# no port ethernet port
Example: (config-vlan-100)# no port ethernet 1.1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no voice-interface
Use the VLAN no voice-interface command to clear VLAN tagging for the originating VoIP
traffic.
Syntax: (config-vlan-{n})# no voice-interface
Example: (config-vlan-100)# no voice-interface
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
port Ethernet port in the form {port}.{sub-interface}.
Adit 3104 and Adit 3200 = 1.1, 1.2, 1.3, 1.4, 2.1
Adit 3500 = 1.1 and 2.1