System information

Adit 3000 CLI - Release 1.6 19-7

Configuration - VLAN Mode

vlan-feature

Use the VLAN mode vlan-feature command to enable/disable the VLAN feature on the device.

Note: This command is not visible on the Adit 3500, as it is always enabled on this product.

Syntax: (config-vlan)# vlan-feature {disable|enable}

Example: (config-vlan)# vlan-feature enable

Supported Platforms:

Adit 3104, Adit 3200

Field Definition

disable Disable VLAN feature.

enable Enable VLAN feature.