System information

Adit 3000 CLI - Release 1.6 2-15
User Mode
show
show interface stats
Use the show interface stats command to display the interface statistics.
Syntax: Adit 3500> show interface stats
Example: Adit 3500> show interface stats
Device=T1 1 State=up Dependency=None Status: Connecting (Alarm Condition)
Device=T1 2 State=up Dependency=None Status: Connecting (Alarm Condition)
Device=T1 3 State=running Dependency=None Status: Connected
Device=T1 4 State=running Dependency=None Status: Connected
Device=Serial 1 State=down IP/Mask=0.0.0.0/255.255.255.255 Dependency=T1 1 Status: Disconnected
Device=Ethernet 2 State=disabled IP/Mask=192.168.2.10/255.255.255.0 Dependency=None
Device=Ethernet 2 State=disabled IP/Mask=100.10.0.1/255.255.255.0 Dependency=None
Device=Ethernet 1 State=running IP/Mask=192.168.1.35/255.255.255.0 Dependency=None Status: Connected; Link: 10T-HD
Tx (Packets/Bytes/Dropped/Errors)=(2362/2498024/0/0)
Rx (Packets/Bytes/Dropped/Errors)=(2211/210493/0/0)
Broadcasts (Tx/Rx)=(0/0) Multicasts=0 Collisions=0
Device=IPsec 0 State=disabled IP/Mask=0.0.0.0/0.0.0.0 Dependency=Serial 1
Device=IPsec 1 State=running IP/Mask=192.168.1.35/255.255.255.0 Dependency=Ethernet 1Status: Connected
Tx (Packets/Bytes/Dropped/Errors)=(0/0/0/0)
Rx (Packets/Bytes/Dropped/Errors)=(0/0/0/0)
Supported Platforms:Adit 3104, Adit 3200, Adit 3500
show licenses
Use the show licenses command to display all feature keys enabled on the Adit.
Syntax: Adit 3500> show licenses
Example: Adit 3500> show licenses
VPN license = No
SIP license = Yes
MGCP license = No
G729A license = Yes
Supported Platforms: Adit 3104, Adit 3200, Adit 3500