System information

Adit 3000 CLI - Release 1.6 17-7
Configuration - PPTPS Mode
shutdown
shutdown
Use the PPTP Server shutdown command to set the admin state of the server down (out-of-service). To
set the admin state up (in-service), see no shutdown command on page 17-6.
Syntax: (config-pptps)# shutdown
Example: (config-pptps)# shutdown
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
start-address
Use the PPTP Server start-address command to set the PPTP remote host IP address range start.
Syntax: (config-pptps)# start-address start-address
Example: (config-pptps)# start-address 192.168.1.1
Supported Platforms:
Adit 3104, Adit 3500
Field Definition
start-ip-address Enter the start IP address of the range.