System information

2-14 Adit 3000 CLI - Release 1.6
User Mode
show
show interface multilink
Use the show interface multilink command to display the configuration of the Multilink.
Syntax: Adit 3500> show interface multilink port
Example: Adit 3500> show interface multilink 1
Device=mlink-1 State=down IP/Mask=Unnumbered
Dependency=t1-1,t1-3
Status: Disconnected
Supported Platforms: Adit 3104, Adit 3200, Adit 3500
show interface serial
Use the show interface serial command to display the configuration of the serial port.
Syntax: Adit 3500> show interface serial port
Example: Adit 3500> show interface serial 3
Device=Serial 1 State=up IP/Mask=0.0.0.0/255.255.255.255
Dependency=T1 1
Status: Reconnecting...
Tx (Packets/Bytes/Dropped/Errors)=(3332/39984/0/0)
Rx (Packets/Bytes/Dropped/Errors)=(0/0/0/0)
Supported Platforms: Adit 3104, Adit 3200, Adit 3500
Field Definition
port Multilink port number. Range = 1.
Field Definition
port Serial interface port.
3104 port range = 1
3500 port range = 1 - 4