System information

Adit 3000 CLI - Release 1.6 16-23
Configuration - PPTPC Mode
ppp time-btwn-reconnect
ppp time-btwn-reconnect
Use the PPTP Client ppp time-btwn-reconnect command configure the time between reconnect
attempts. To reset to the default setting, see no ppp time-btwn-reconnect command on page 16-19.
Syntax: (config-pptpc-{n})# ppp time-btwn-reconnect seconds
Example: (config-pptpc-1)# ppp time-btwn-reconnect 15
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
ppp username
Use the PPTP Client ppp username command set the PPP Login User Name. To delete a PPP user, see
no ppp username command on page 16-19.
Syntax: (config-pptpc-{n})# ppp username username
Example: (config-pptpc-1)# ppp username test-user-name
Supported Platforms: Adit 3104, Adit 3200, Adit 3500
schedule-availability
Use the PPTP Client schedule-availability command to apply a schedule rule to this interface. To
delete a schedule, see no schedule-availability command on page 16-19.
Syntax: (config-pptpc-{n})# schedule-availability time-range schedule-
id
Example: (config-pptpc-1)# schedule-availability time-range 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
seconds Set the interval of time between reconnect attempts.
Range is 0 - 99999 seconds with a default of 0.
Field Definition
username Enter the Username, with a maximum of 19 characters.
Field Definition
schedule-id Enter an existing schedule rule name. See time-range command on
page 4-59 to set the schedule-id