System information

Adit 3000 CLI - Release 1.6 2-13
User Mode
show
show interface description
Use the show interface description command to display the interface information.
Syntax: Adit 3500> show interface description
Example: Adit 3500> show interface description
Device State IP/Mask Dependencies
T1 1 running None
T1 2 running None
T1 3 up None
T1 4 up None
Serial 1 up 0.0.0.0/255.255.255.255 T1 1
Ethernet 2 disabled 0.0.0.0/0.0.0.0 None
Ethernet 1 running 192.168.1.1/255.255.255.0 None
IPsec 0 disabled 0.0.0.0/0.0.0.0 Serial 1
IPsec 1 running 192.168.1.1/255.255.255.0 Ethernet 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
show interface ethernet
Use the show interface ethernet command to display the Ethernet interface information.
Syntax: Adit 3500> show interface ethernet port
Example: Adit 3500> show interface ethernet 1
Device=Ethernet 1 State=running IP/Mask=192.168.1.1/255.255.255.0
Dependency=None
Status: Connected; Link: 10T-HD
Tx (Packets/Bytes/Dropped/Errors)=(1620/1643674/0/0)
Rx (Packets/Bytes/Dropped/Errors)=(1636/143050/0/0)
Broadcasts (Tx/Rx)=(0/0) Multicasts=0 Collisions=0
Supported Platforms: Adit 3104, Adit 3200, Adit 3500
Field Definition
port Ethernet port number range 1-2.