System information
CHAPTER
16
Configuration - PPTPC Mode
The PPTPC Configuration commands allow the user to configure the VPN (Virtual Private Network)
Point-to-Point Tunneling Protocol Client parameters.
Enter this sub-group with the (config)# pptp command from the Configure mode.
The VPN PPTPC commands are represented by the (config-pptpc-1)# prompt.
PPTP Client Commands
do ip primary-dns
end ip rip
exit ip route
firewall ip route-mode
history ip secondary-dns
ip address metric
ip default-route no commands
ip mtu ppp authentication
ip ospf authentication ppp encryption
ip ospf authentication-key ppp exec-timeout
ip ospf cost ppp on-demand
ip ospf dead-interval ppp password
ip ospf disable ppp restart-timer
ip ospf hello-interval ppp time-btwn-reconnect
ip ospf message-digest-key ppp username
ip ospf priority schedule-availability
ip ospf retransmit-interval shutdown
ip ospf transmit-delay sip-alg