System information

Adit 3000 CLI - Release 1.6 14-23
Configuration - L2TPC Mode
schedule-availability
schedule-availability
Use the L2TPC schedule-availability command to apply a schedule rule to this interface. To delete a
schedule, see no schedule-availability command on page 14-19.
Syntax: (config-l2tpc-{n})# schedule-availability time-range schedule-
id
Example: (config-l2tpc-1)# schedule-availability time-range 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
shutdown
Use the L2TPC shutdown command to disable the Serial port. To set the Serial port up
(In-Service), see no shutdown command on page 14-19.
Syntax: (config-l2tpc-{n})# shutdown
Example: (config-l2tpc-1)# shutdown
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
sip-alg
Use the L2TPC sip-alg command to enable SIP ALG. To disable SIP ALG, see no sip-alg command on
page 14-20.
Syntax: (config-l2tpc-{n})# sip-alg enable
Example: (config-l2tpc-1)# sip-alg enable
Supported Platforms:
Adit 3104, Adit 3500
Field Definition
schedule-id Enter an existing schedule rule name. See time-range command on
page 4-59 to set the schedule-id