System information

14-22 Adit 3000 CLI - Release 1.6
Configuration - L2TPC Mode
ppp restart-timer
ppp restart-timer
Use the L2TPC ppp restart-timer command to configure the PPP restart timer. To set the restart timer
to the default setting, see no ppp restart-timer command on page 14-18.
Syntax: (config-l2tpc-{n})# ppp restart-timer seconds
Example: (config-l2tpc-1)# ppp restart-timer 15
Supported Platforms: Adit 3104, Adit 3200, Adit 3500
ppp time-btwn-reconnect
Use the L2TPC ppp time-btwn-reconnect command configure the time between reconnect attempts.
To reset to default value, see no ppp time-btwn-reconnect command on page 14-19.
Syntax: (config-l2tpc-{n})# ppp time-btwn-reconnect seconds
Example: (config-l2tpc-1)# ppp time-btwn-reconnect 15
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
ppp username
Use the L2TPC ppp username command set the PPP Login User Name. To delete a PPP user, see no
ppp username command on page 14-19.
Syntax: (config-l2tpc-{n})# ppp username username
Example: (config-l2tpc-1)# ppp username test-user-name
Supported Platforms: Adit 3104, Adit 3200, Adit 3500
Field Definition
seconds Range is 1 - 65535 seconds. Default is 3 seconds.
Field Definition
seconds Set the interval of time between reconnect attempts.
Range is 0 - 99999 seconds with a default of 0.
Field Definition
username Enter the Username, with a maximum of 19 characters.