System information

Adit 3000 CLI - Release 1.6 14-21
Configuration - L2TPC Mode
ppp exec-timeout
ppp exec-timeout
Use the L2TPC ppp exec-timeout command to set the PPP maximum idle time before hangup.To
disable PPP idle time, see no ppp exec-timeout command on page 14-18.
Syntax: (config-l2tpc-{n})# ppp exec-timeout minutes
Example: (config-l2tpc-1)# ppp exec-timeout 150
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
ppp on-demand
Use the L2TPC ppp on-demand command to enable on demand the feature. On demand attempts to
connect only when packets are sent. To disable PPP on demand, see no ppp encryption command on
page 14-17.
Syntax: (config-l2tpc-{n})# ppp on-demand
Example: (config-l2tpc-1)# ppp on-demand
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
ppp password
Use the L2TPC ppp password command set the PPP password. To delete a PPP password, see no ppp
password command on page 14-18.
Syntax: (config-l2tpc-{n})# ppp password password
Example: (config-l2tpc-1)# ppp username test-user-pswrd
Supported Platforms: Adit 3104, Adit 3200, Adit 3500
Field Definition
minutes Range is 0 - 99999 minutes.
Field Definition
password Enter the PPP password, with a maximum of 19 characters.