System information

14-18 Adit 3000 CLI - Release 1.6
Configuration - L2TPC Mode
no commands
no ppp exec-timeout
Use the L2TPC no ppp exec-timeout command to disable PPP idle time. To set the PPP maximum
idle time before hangup, see ppp exec-timeout command on page 14-21.
Syntax: (config-l2tpc-{n})# no ppp exec-timeout
Example: (config-l2tpc-1)# no ppp exec-timeout
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no ppp on-demand
Use the L2TPC no ppp on-demand command to disable PPP on-demand. To enable PPP on
demand, see ppp on-demand command on page 14-21.
Syntax: (config-l2tpc-{n})# no ppp on-demand
Example: (config-l2tpc-1)# no ppp on-demand
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no ppp password
Use the L2TPC no ppp password command to remove the PPP password. To set the PPP password,
see ppp password command on page 14-21.
Syntax: (config-l2tpc-{n})# no ppp password
Example: (config-l2tpc-1)# no ppp password
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no ppp restart-timer
Use the L2TPC no ppp restart-timer command to set the restart timer back to the default setting.
To set the restart timer, see ppp restart-timer command on page 14-22.
Syntax: (config-l2tpc-{n})# no ppp restart-timer
Example: (config-l2tpc-1)# no ppp restart-timer
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500