System information

2-8 Adit 3000 CLI - Release 1.6
User Mode
show
show arp
Use the show arp command to display the Adit’s ARP (Address Resolution Protocol) table.
Syntax: Adit 3500> show arp {all|address|ethernet port}
Example: Adit 3500> show arp ethernet 1
1 192.168.1.1 ether Dynam 00:50:da:59:f0:25 eth_lan
Example: Adit 3500> show arp 192.168.1.1
ip=192.168.1.1 flags=Dynam mac=00:50:da:59:f0:25 iface=eth_lan
Example: Adit 3500> show arp all
# IP-address HW-type Flags HW-address Iface
1 192.168.1.1 ether Dynam 00:50:da:59:f0:25 eth-1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
all Display entire ARP table.
address Display ARP items of the entered IP address.
ethernet port Display Ethernet ARP items only.
port - Define an Ethernet port number. Range 1 - 2.