System information

13-18 Adit 3000 CLI - Release 1.6
Configuration - IPSec Mode
reconnect
reconnect
Use the IPSec reconnect command to enable the automatic reconnection option. To disable
reconnection, see no reconnect command on page 13-16.
Syntax: (config-int-ser-{n})# reconnect
Example: (config-int-ser-1)# reconnect
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
rekey
Use the IPSec rekey command to set the rekey lifetime, rekey margin and rekey fuzz percent.
Syntax: (config-int-ser-{n})# rekey lifetime seconds margin margin
percent percent
Example: (config-int-ser-1)# rekey lifetime 3 margin 500 percent 200
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
remote-ip
Use the IPSec remote-ip command to modify a remote tunnel endpoint address.
Syntax: (config-int-ser-{n})# remote-ip address
Syntax: (config-int-ser-1)# remote-ip 10.10.2.10
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
seconds Set the connection rekey lifetime. Range is 1-28800 seconds, with a
default of 3600.
margin Set the rekey margin number. Range is 1-540, with a default of 540.
percent Set the rekey fuzz percent. Range 1-200, with a default of 100.
Field Definition
address Enter a remote IP address.