System information

13-16 Adit 3000 CLI - Release 1.6
Configuration - IPSec Mode
no commands
no netbios
Use the IPSec no netbios command to disable routing of NetBIOS broadcasts. To enable NetBIOS
broadcasts, see netbios command on page 13-12.
Syntax: (config-int-ser-{n})# no netbios
Example: (config-int-ser-1)# no netbios
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no reconnect
Use the IPSec no reconnect command to disable automatic reconnection. To enable reconnection, see
reconnect command on page 13-18.
Syntax: (config-int-ser-{n})# no reconnect
Example: (config-int-ser-1)# no reconnect
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no schedule-availability
Use the IPSec no schedule-availability command to set schedule availability to the default value. To
set a schedule rule, see schedule-availability command on page 13-19.
Syntax: (config-int-ser-{n})# no schedule-availability
Example: (config-int-ser-1)# no schedule-availability
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no set-pfs
Use the IPSec no set-pfs command to disable Perfect Forward Secrecy. To enable PFS, see set-pfs
command on page 13-20.
Syntax: (config-int-ser-{n})# no set-pfs
Example: (config-int-ser-1)# no set-pfs
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500