System information

Adit 3000 CLI - Release 1.6 13-15
Configuration - IPSec Mode
no commands
no hash
Use the IPSec no hash command to disable a hash algorithm. To set a hash algorithm, see hash
command on page 13-6.
Syntax: (config-int-ser-{n})# no hash {md5|sha}
Example: (config-int-ser-1)# no hash md5
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no ip default-route
Use the IPSec no ip default-route command to remove an existing IPSec connection. To create an
IPSec connection, see ip default-route command on page 13-7.
Syntax: (config-int-ser-{n})# no ip default-route
Example: (config-int-ser-1)# no ip default-route
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no ip rip
Use the IPSec no ip rip command to disable RIP. To enable RIP, see ip rip enable command on
page 13-8.
Syntax: (config-int-ser-{n})# no ip rip
Example: (config-int-ser-1)# no ip rip
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no ipsec-manual
Use the IPSec no ipsec-manual command to enable automatic key exchange method. To enable manual
key exchange method, see ipsec-manual command on page 13-9.
Syntax: (config-int-ser-{n})# no ipsec-manual
Example: (config-int-ser-1)# no ipsec-manual
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
md5 Disable the MD5 algorithm.
sha Disable SHA1. SHA = Secure Hash Algorithm.