System information

Adit 3000 CLI - Release 1.6 13-9
Configuration - IPSec Mode
ip route metric
ip route metric
Use the IPSec mode ip route metric command to define a number for the device metric.
Syntax: (config-ipsec {n})# ip route metric metric
Example: (config-ipsec-1)# ip route metric 25
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
ipsec-conn
Use the IPSec mode ipsec-conn command to enable or disable an IPSec connection without removing
it.
Syntax: (config-ipsec {n})# ipsec-conn {disable|enable}
Example: (config-ipsec-1)# ipsec-conn enable
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
ipsec-manual
Use the IPSec mode ipsec-manual command to select manual key exchange method. To enable
automatic key exchange method, see no ipsec-manual command on page 13-15.
Syntax: (config-ipsec {n})# ipsec-manual
Example: (config-ipsec-1)# ipsec-manual
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
metric Enter a number for the device metric. Range is 0-255, with a default of
10.
Field Definition
disable Disable the IPSec connection.
enable Enable the IPSec connection.