System information

Adit 3000 CLI - Release 1.6 13-7
Configuration - IPSec Mode
history
history
Use the history command to display commands that have been entered in this session. Note: This
command can be entered in any configuration mode.
Syntax: (config-ipsec {n})# history
Example: (config-ipsec-1)# history
dpd
dpd-timeout 900
history
ip rip r
ip rip receive-version 1or2
ip rip enable
reconnect
ipsec-conn enable
history
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
ip default-route
Use the IPSec ip default-route command to enable the default route. To disable the default route, see
no ip default-route command on page 13-15.
Syntax: (config-ipsec {n})# ip default-route
Example: (config-ipsec-1)# ip default-route
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500