System information

12-24 Adit 3000 CLI - Release 1.6
Configuration - Serial Interface Mode
schedule-availability
schedule-availability
Use the Serial Interface schedule-availability command to apply a schedule rule to this interface. To
delete a schedule, see no schedule-availability command on page 12-20.
Syntax: (config-int-ser-{n})# schedule-availability time-range
schedule-id
Example: (config-int-ser-1)# schedule-availability time-range 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
shutdown
Use the Serial Interface shutdown command to disable the Serial port. To set the Serial port up (In-
Service), see no shutdown command on page 12-20.
Syntax: (config-int-ser-{n})# shutdown
Example: (config-int-ser-1)# shutdown
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
sip-alg
Use the Serial Interface sip-alg command to enable SIP ALG. To disable SIP ALG, see no sip-alg
command on page 12-20.
Syntax: (config-int-ser-{n})# sip-alg enable
Example: (config-int-ser-1)# sip-alg enable
Supported Platforms:
Adit 3104, Adit 3500
Field Definition
schedule-id Enter an existing schedule rule name. See time-range command on
page 4-59 to set the schedule-id