System information

12-20 Adit 3000 CLI - Release 1.6
Configuration - Serial Interface Mode
no commands
no ppp username
Use the Serial Interface no ppp username command remove the PPP username. To set a PPP user,
see ppp username command on page 12-23.
Syntax: (config-int-ser-{n})# no ppp username username
Example: (config-int-ser-1)# no ppp username test-user-name
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no schedule-availability
Use the Serial Interface no schedule-availability command to disable a schedule rule. To add a
rule, see schedule-availability command on page 12-24.
Syntax: (config-int-ser-{n})# no schedule-availability
Example: (config-int-ser-1)# no schedule-availability
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no shutdown
Use the Serial Interface no shutdown command to set the Serial port up (In-Service). To set the
interface down (Out-of-Service), see shutdown command on page 12-24.
Syntax: (config-int-ser-{n})# no shutdown
Example: (config-int-ser-1)# no shutdown
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no sip-alg
Use the Serial Interface no sip-alg command to disable SIP ALG on this interface. To enable SIP
ALG, see sip-alg command on page 12-24.
Syntax: (config-int-ser-{n})# no sip-alg
Example: (config-int-ser-1)# no sip-alg
Supported Platforms:
Adit 3104, Adit 3500