System information

Adit 3000 CLI - Release 1.6 2-3
User Mode
exit
exit
Use the exit command to close your current connection if you are in the User mode, or Privileged mode.
If the command is entered in a subconfiguration mode (Interface or Routing), this command takes you
to the next higher level (example: back to Privileged mode from Interface configuration mode).
Syntax: Adit 3500> exit
Example: Adit 3500> exit
Adit 3500 Username:admin
Adit 3500 Password:********
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
help
Use the help command to display the help information for this command. Note: This can also be
accomplished with a ?. Note: This command can be entered in any Configuration mode.
Syntax: Adit 3500> help
or
Syntax: Adit 3500> ?
Example: Adit 3500> help
? Display all commands
date Display time/date
enable Enter Privileged mode
end Logout from the device
exit Exit from the current level
help Display all commands
history Display past entered commands
ping Ping a remote host
show Show various system information
traceroute Traceroute to a remote host
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500