System information

Adit 3000 CLI - Release 1.6 11-19
Configuration - Multilink Interface Mode
no commands
no ppp on-demand
Use the Multilink Interface no ppp on-demand command to disable PPP on-demand. To enable
PPP on demand, see ppp on-demand command on page 11-22.
Syntax: (config-int-mlink-{n})# no ppp on-demand
Example: (config-int-mlink-1)# no ppp on-demand
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no ppp password
Use the Multilink Interface no ppp password command to remove the PPP password. To set the
PPP password, see ppp password command on page 11-22.
Syntax: (config-int-mlink-{n})# no ppp password
Example: (config-int-mlink-1)# no ppp password
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no ppp qos interleaving
Use the Multilink Interface no ppp username command remove the PPP username. To set a PPP
user, see ppp username command on page 11-24.
Syntax: (config-int-mlink-{n})# no ppp username
Example: (config-int-mlink-1)# no ppp username
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no ppp username
Use the Multilink Interface no ppp username command remove the PPP username. To set a PPP
user, see ppp username command on page 11-24.
Syntax: (config-int-mlink-{n})# no ppp username
Example: (config-int-mlink-1)# no ppp username
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500