System information

2-2 Adit 3000 CLI - Release 1.6
User Mode
date
date
Use the date command to display the Adit’s current date.
Syntax: Adit 3500> date
Example: Adit 3500> date
Wed Jan 12 10:37:51 2007
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
enable
Use the enable command (at the User Command mode prompt) to enter the Privileged Command
mode. Note: Once a correct password has been entered, note the prompt changes from a "Adit 3500>"
to "#".
Syntax: Adit 3500> enable
Example: Adit 3500> enable
password: ********
Adit 3500#
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
end
Use the end command to exit the current Configuration mode, and must be used to mark the end of any
configuration file. Note: This command can be entered in any Configuration mode with the same result.
Syntax: Adit 3500> end
Example: Adit 3500> end
Adit 3500 Username:admin
Adit 3500 Password:********
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500