System information

10-24 Adit 3000 CLI - Release 1.6
Configuration - Ethernet Interface Mode
release
release
Use the Ethernet Interface release command to release the DHCP lease.
Syntax: (config-int-eth-{n})# release
Example: (config-int-eth-1)# release
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
remote-admin
Use the Ethernet Interface remote admin command to enable Remote Access on this interface. To
disable remote access, see no remote-admin command on page 10-22.
Syntax: (config-int-eth-{n})# remote-admin enable
Example: (config-int-eth-1)# remote-admin enable
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
renew
Use the Ethernet Interface renew command to renew the DHCP lease.
Syntax: (config-int-eth-{n})# renew
Example: (config-int-eth-1)# renew
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500