System information

10-16 Adit 3000 CLI - Release 1.6
Configuration - Ethernet Interface Mode
ip secondary-dns
ip secondary-dns
Use the Ethernet Interface ip secondary-dns command to configure the secondary DNS. To delete a
secondary DNS address, see no ip secondary-dns command on page 10-21.
Syntax: (config-int-eth-{n})# ip secondary-dns address
Example: (config-int-eth-1)# ip secondary-dns 192.168.1.200
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
metric
Use the Ethernet Interface metric command to configure the Metric of the IP network on this interface.
Syntax: (config-int-eth-{n})# metric metric
Example: (config-int-eth-1)# metric 150
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
address Enter the IP address of the secondary Domain Name Server (DNS).
Field Definition
metric Range is 0-255, with a default is 10.