System information

Adit 3000 CLI - Release 1.6 10-13
Configuration - Ethernet Interface Mode
ip primary-dns
ip primary-dns
Use the Ethernet Interface ip primary-dns command to configure the primary DNS. To delete a
primary DNS, see no ip primary-dns command on page 10-20.
Syntax: (config-int-eth-{n})# ip primary-dns address
Example: (config-int-eth-1)# ip primary-dns 192.168.1.100
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
ip proxy-arp
Use the Ethernet Interface ip proxy-arp command to enable proxy ARP on this interface. To disable
prosy ARP, see no ip proxy-arp command on page 10-21.
Syntax: (config-int-eth-{n})# ip proxy-arp
Example: (config-int-eth-1)# ip proxy-arp
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
address Enter the IP address of the primary server.