System information

9-6 Adit 3000 CLI - Release 1.6
Configuration - Dial Peer VoIP Mode
prefix
prefix
Use the Dial Peer prefix command to define the prefix of the phone number. To delete a prefix, see no
prefix command on page 9-5.
Syntax: (config-dpeer-voip)# prefix prefix
Example: (config-dpeer-voip)# prefix 1303
Supported Platforms:
Adit 3104, Adit 3500
session-target
Use the Dial Peer session-target command to configure the session target. To delete a target, see no
session-target command on page 9-5.
Syntax: (config-dpeer-voip)# session-target {hostname hostname|
ip-address address|local fxs-number|proxy}
Example: (config-dpeer-voip)# session-target ip-address 192.168.1.100
Supported Platforms:
Adit 3104, Adit 3500
Field Definition
prefix Prefix is the digits or a name to be added to the phone number after the
stripping process has been applied. Up to 10 digits may be entered.
Field Definition
hostname Indicates that the domain name server will be used to resolve the name
of the IP address.
address Enter the IP address of the dial peer.
fxs-number Enter a FXS port. Range 1 - 24.
proxy Set the session target to be routed through the proxy.