System information

Adit 3000 CLI - Release 1.6 9-5
Configuration - Dial Peer VoIP Mode
no commands
no commands
no destination-pattern
Use the Dial Peer no destination-pattern command to remove a destination pattern. To set the
destination pattern, see destination-pattern command on page 9-2.
Syntax: (config-dpeer-voip)# no destination-pattern
Example: (config-dpeer-voip)# no destination-pattern
Supported Platforms:
Adit 3500
no prefix
Use the Dial Peer no prefix command to remove the prefix of the phone number. To define a prefix,
see prefix command on page 9-6.
Syntax: (config-dpeer-voip)# no prefix
Example: (config-dpeer-voip)# no prefix 1303
Supported Platforms:
Adit 3104, Adit 3500
no session-target
Use the Dial Peer no session-target command to remove session target. To configure a session
target, see session-target command on page 9-6.
Syntax: (config-dpeer-voip)# no session-target
Example: (config-dpeer-voip)# no session target
Supported Platforms:
Adit 3104, Adit 3500