System information

9-2 Adit 3000 CLI - Release 1.6
Configuration - Dial Peer VoIP Mode
destination-pattern
destination-pattern
Use the Dial Peer destination-pattern command to define the full telephone number to be used for a
dial peer. To delete a preference, see no destination-pattern command on page 9-5.
Syntax: (config-dpeer-voip)# destination-pattern number
Example: (config-dpeer-voip)# destination-pattern 5551212
Supported Platforms: Adit 3104, Adit 3500
Field Definition
number Enter the phone number to be used for a dial peer.