System information

Adit 3000 CLI - Release 1.6 1-3
Introduction
Overview
Prompt Identifier
When you initiate a CLI session it will open in the User Mode, which is clearly indicated by the ">"
prompt. At any time you can quickly determine which mode you are in by the prompt (see table above).
User Mode
In the User Mode, the operator is allowed to view only limited information (not able to modify
configurations). Editing the Adit’s configuration requires you to be in the privileged mode, which
requires a password.
Privileged Mode
The Privileged Mode requires a password, and allows the operator to enter the Configuration mode.
Command
Mode
Access Method Prompt
Displayed
Exit Method
User Login Adit 3000> Use the logout command
Privileged From User mode, enter the
enable command
Adit 3000# To exit to User mode, use the exit, or
end command.
Global
Configuration
From the Privileged Mode, enter
the configure terminal
command.
Adit 3000
(config)#
To exit to Privileged Mode, use the exit
or end command, or press Ctrl-z.