System information

8-2 Adit 3000 CLI - Release 1.6
Configuration - Dial Peer Trunk Mode
codec preference
codec preference
Use the Dial Peer codec preference command to set the codec preferences used to establish the codec
list offered during media negotiation. To delete a preference, see no codec preference command on
page 8-7.
Syntax: (config-dpeer-trk)# codec preference {1|2|3} {g711alaw|
g711ulaw|g729}
Example: (config-dpeer-trk)# codec preference 1 g711alaw
Supported Platforms:
Adit 3500
destination-pattern
Use the Dial Peer destination-pattern command to define the full telephone number to be used for a
dial peer. To delete a pattern, see no destination-pattern command on page 8-7.
Syntax: (config-dpeer-trk)# destination-pattern number
Example: (config-dpeer-trk)# destination-pattern 5551212
Supported Platforms: Adit 3500
Field Definition
1|2|3 Enter the preference number. #1 being the first preference.
g711alaw Set the codec preference to G.711 A-law.
g711ulaw Set the codec preference to G.711 U-law.
g729 Set the codec preference to G.729.
Field Definition
number Enter the phone number to be used for a dial peer.