System information

Adit 3000 CLI - Release 1.6 7-7

Configuration - Dial Peer FXS Mode

modem-protocol

Use the Dial Peer modem-protocol command to configure the modem protocol.

Syntax: (config-dpeer-fxs)# modem-protocol {none|pass-through}

Example: (config-dpeer-fxs)# modem-protocol pass-though

Supported Platforms:

Adit 3104, Adit 3500

Field Definition

none A Modem call would be treated as a normal voice call. Default.

pass-through Will cause the line to transmit in G.711 mode, with echo cancellation

and silence suppression disabled, on detection of Modem tone.