System information

4-62 Adit 3000 CLI - Release 1.6
Global Configuration Mode
voice-port fxs
voice-port fxs
Use the voice-port fxs command to allow access to the Voice Port FXS configuration commands. See
Chapter 22, Configuration - Voice Port FXS Mode for commands in this mode.
Syntax: (config)# voice-port fxs port
Example: (config)# voice-port fxs 1
(config-vport-fxs-1)#
Supported Platforms:
Adit 3104, Adit 3500
voice-port trunk
Use the voice-port trunk command to allow access to the Voice Port Trunk configuration commands.
See Chapter 23, Configuration - Voice Port Trunk Mode for commands in this mode. To remove access
to a Voice Port Trunk, see no voice-port trunk command on page 4-49.
Syntax: (config)# voice-port trunk port
Example: (config)# voice-port trunk 1
(config-vport-trk-1)#
Supported Platforms:
Adit 3500
voice-service sip
Use the voice-service sip command to allow access to the Voice Service SIP configuration commands.
See Chapter 24, Configuration - Voice Service SIP Mode for commands in this mode.
Syntax: (config)# voice-service sip
Example: (config)# voice-service sip
(config-serv-sip)#
Supported Platforms:
Adit 3104, Adit 3500
Field Definition
port FXS voice port number. Range is 1.
Field Definition
port FXS voice port number. Range is 1.