System information

Adit 3000 CLI - Release 1.6 4-61

Global Configuration Mode

voice-codec

Use the voice-codec command to select which codecs are to be enabled and allows the user to set the

Packetization Time for that codec. To disable a codec, see no voice-codec command on page 4-49.

Syntax: (config)# voice-codec {g711alaw|g711ulaw|g729}

ptime {10|20|30|40|50|60|70|80}

Example: (config)# voice-codec g711alaw ptime 30

Supported Platforms:

Adit 3104, Adit 3500

voice-port (global)

Use the voice-port fxs command to allow access to the Voice Port (global) configuration commands.

See Chapter 21, Configuration - Voice Port Mode for commands in this mode.

Syntax: (config)# voice-port

Example: (config)# voice-port

(config-vport)#

Supported Platforms:

Adit 3104, Adit 3500

Field Definition

g711alaw G.711, 64kbps, A-law

g711ulaw G.711, 64kbps, μ-law

g729 G.729, 8kbps

ptime Set the Packetization Time for the codec. Default for all is 20.

Packetization Time for each codec is as follows:

G.711A-Law = 10, 20, 30, 40, 50 or 60

G.711μ-Law = 10, 20, 30, 40, 50 or 60

G.729 = 10, 20, 30, 40, 50, 60, 70 or 80