System information

Adit 3000 CLI - Release 1.6 4-53
Global Configuration Mode
router ospf
remote-admin web
Use the remote-admin web command to allow remote administration to the Adit via Web-
management. To deny Web remote access, see no remote-admin web command on page 4-45.
CAUTION! ALLOWING REMOTE ADMINISTRATION TO THE ADIT IS A SECURITY RISK.
Syntax: (config)# remote-admin web {primary-port|
secondary-port|primary-secure-port|secondary-secure-port}
[port] enable
Example: (config)# remote-admin web primary-port enable
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
router ospf
Use the router ospf command to allow access to the Router OSPF global configuration commands. See
Chapter 15, Configuration - OSPF Mode for commands in this mode. For the no counterpart of this
command, see no router ospf command on page 4-45.
Syntax: (config)# router ospf
Example: (config)# router ospf
(config-router-ospf)#
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
primary-port Primary HTTP port, default port 80
secondary-port Secondary HTTP port, default port 8080
primary-secure-
port
Primary HTTPS port, default port 443
secondary-secure-
port
Secondary HTTPS port, default port 8443
port Enter a specific port to change from default ports listed above.