System information

Adit 3000 CLI - Release 1.6 4-51

Global Configuration Mode

radius-client

Use the radius-client command to allow access to the RADIUS configuration commands. See Chapter

18, Configuration - RADIUS Mode for commands in this mode. For the no counterpart of this command,

see no radius-client command on page 4-43.

Syntax: (config)# radius-client

Example: (config)# radius-client

(config-radius)#

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500

remote-admin

remote-admin icmp

Use the remote-admin icmp command to allow ICMP echo requests (pings). To deny ICMP echo

requests, see no remote-admin icmp command on page 4-43.

CAUTION! ALLOWING REMOTE ADMINISTRATION TO THE ADIT IS A SECURITY RISK.

Syntax: (config)# remote-admin icmp enable

Example: (config)# remote-admin icmp enable

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500

remote-admin snmp

Use the remote-admin snmp command to allow SNMP control and diagnostic requests. To deny

SNMP, see no remote-admin snmp command on page 4-43.

CAUTION! ALLOWING REMOTE ADMINISTRATION TO THE ADIT IS A SECURITY RISK.

Syntax: (config)# remote-admin snmp enable

Example: (config)# remote-admin snmp enable

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500