System information

Adit 3000 CLI - Release 1.6 4-49
Global Configuration Mode
no commands
no vlan
Use the no vlan command to clear all VLANs. To enter the VLAN configuration mode, see vlan
(global) command on page 4-60.
Syntax: (config)# no vlan
Example: (config)# no vlan
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no voice-codec
Use the no voice-codec command to remove a voice codec. To set the voice codecs, see voice-codec
command on page 4-61.
Syntax: (config)# no voice-codec {g711alaw|g711ulaw|g729}
Example: (config)# no voice-codec g711alaw
Supported Platforms:
Adit 3104, Adit 3500
no voice-port trunk
Use the no voice-port trunk command to disable the Voice Port Trunk. To enter the Voice Port
Trunk configuration mode, see voice-port trunk command on page 4-62.
Syntax: (config)# no voice-port trunk port
Example: (config)# no voice-port trunk 1
Supported Platforms:
Adit 3500
Field Definition
g711alaw G.711, 64kbps, u-law
g711ulaw G.711, 64kbps, A-law
g729 G.729, 8kbps
Field Definition
port Trunk port number. Range is 1.