System information

Adit 3000 CLI - Release 1.6 4-47
Global Configuration Mode
no commands
no service
Use the no service command to disable named services. To enable services, see service command
on page 4-56.
Syntax: (config)# no service service-id
Example: (config)# no service-id 16777220
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no snmp-server
Use the no snmp-server command to disable SNMP on the system. To enable SNMP, see snmp-
server command on page 4-57.
Syntax: (config)# no snmp-server
Example: (config)# no snmp-server
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no snmp-server traps
Use the no snmp-server traps command to disable SNMP traps on the system. To enable SNMP
traps, see snmp-server traps enable command on page 4-58.
Syntax: (config)# no snmp-server traps
Example: (config)# no snmp-server traps
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
service-id Enter the service number to apply the rule to. Note: The Service ID
number is displayed with the show service command, on page 3-54