System information

4-40 Adit 3000 CLI - Release 1.6
Global Configuration Mode
no commands
no ip dhcp pool ethernet
Use the DHCP Pool no ip dhcp pool ethernet command to disable the DHCP server for the
interface defined. To enter the DHCP configuration mode, see ip dhcp pool ethernet command on
page 4-23.
Syntax: (config)# no ip dhcp pool ethernet port
Example: (config)# no ip dhcp pool ethernet 2
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no l2tpc
Use the no l2tpc command to disable the VPN L2TPC. To enter the VPN L2TPC configuration mode,
see the l2tpc command on page 4-24.
Syntax: (config)# no l2tpc {l2tpc connection-id|address address}
Example: (config)# no l2tpc l2tpc 1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
no local-server
Use the no local-server command to disable a local server. To enable a local server, see local-
server command on page 4-25.
Syntax: (config)# no local-server name
Example: (config)# no local-server BoulderServer
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field Definition
port Ethernet port number. Range is 1 or 2.
Field Definition
connection-id Enter the name of a connection.
address Enter a destination IP address.
Field Definition
name Enter a name of the server to remove.